using CentralControl.BaseData;
using CommonFunc;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading;
using CentralControl.DBDAO;
using XGL.Thrift;

namespace CentralControl.App_Code
{
    /// <summary>
    /// 入库暂存区逻辑
    /// </summary>
    public class Logic1006EmptyLocator
    {
        /// <summary>
        /// plc 正在读取
        /// </summary>
        bool IsPlcRead { get; set; }

        Thread InputMaterialThread;
        PlcHelper plcHelper;
        string LineNo { get; set; }
        NodeSetting ScanPoint { get; set; }
        /// <summary>
        /// 是否运行发车中
        /// </summary>
        bool IsRuning { get; set; }
        //NodeSetting OutLocatorPoint { get; set; }
        /// <summary>
        /// 1号上件点 空车信号
        /// </summary>
        NodeSetting otherLocatorPoint1 { get; set; }
        /// <summary>
        /// 2号上件点 空车信号
        /// </summary>
        NodeSetting otherLocatorPoint2 { get; set; }

        public Logic1006EmptyLocator(PlcHelper plc, string nodeno)
        {
            try
            {
                this.ScanPoint = StaticData.NodeSettingList.FirstOrDefault(t => t.NodeNo == nodeno);



                if (this.ScanPoint != null)
                {
                    this.LineNo = this.ScanPoint.LineCatchArea != null ? this.ScanPoint.LineCatchArea.LineNo : "1";

                }
                else
                {
                    Logger logger = new Logger();
                    logger.Log("创建线体,未找到扫描点位");
                }
                this.LineNo = LineNo;
                this.plcHelper = plc;
                ///回写plc状态处理完成,plc会清理数据
                object wcsend = this.plcHelper.Read(ScanPoint.PlcSetting5);
                //if (Convert.ToInt32(wcsend) == 1)
                //{
                //默认启动,清理plc的上位机写入点位值
                this.plcHelper.Write(this.ScanPoint.PlcSetting4, 0);
                this.plcHelper.Write(this.ScanPoint.PlcSetting5, 0);
                //  }
            }
            catch (Exception ex)
            {
                Console.WriteLine("站点" + nodeno + " 初始化数据异常" + ex.Message);
                Logger logger = new Logger();
                logger.Error("站点" + nodeno + " 初始化数据异常" + ex.Message);
            }

        }

        /// <summary>
        /// 启动上件扫描监听
        /// </summary>
        public void StartPoint()
        {

            InputMaterialThread = new Thread(MonitorInLocatorPoint);
            InputMaterialThread.Start();
        }



        /// <summary>
        /// 前端点击放行,放行小车队列
        /// </summary>
        /// <param name="lineNo"></param>
        /// <param name="materials"></param>
        public void MonitorInLocatorPoint()
        {

            Logger logger = new Logger();
            while (true)
            {
                try
                {


                    ///读取小车号
                    object carobj = this.plcHelper.Read(this.ScanPoint.PlcSetting1);
                    string carno = Common.getCarNoByPlcPoint(carobj);
                    //小车是否到位 
                    object carstate = this.plcHelper.Read(this.ScanPoint.PlcSetting2);
                    //小车是否离开
                    object carrun = this.plcHelper.Read(this.ScanPoint.PlcSetting3);
                    ///上位机写入岔道信息
                    object wcsstate = this.plcHelper.Read(this.ScanPoint.PlcSetting4);
                    ///回写plc状态处理完成,plc会清理数据
                    object wcsend = this.plcHelper.Read(this.ScanPoint.PlcSetting5);
                    if (carno != null && carstate != null && carrun != null && wcsstate != null && wcsend != null)
                    {

                        if (Convert.ToInt32(carno) > 0 && Convert.ToInt32(wcsend) == 0 && Convert.ToInt32(wcsstate) == 0 && Convert.ToInt32(carstate) == 1 && Convert.ToInt32(carrun) == 0 && IsPlcRead == false)
                        {

                            CarRealInfo car = StaticData.CarRealList.Where(t => t.CarNo == carno.ToString()).FirstOrDefault();

                            /**测试数据**/
                            //car.LocatorArea = new LineCatchArea();
                            //car.LocatorArea.AreaNo = "1";
                            DBService.AddSystemLog(this.ScanPoint.NodeNo, car);


                            var emptyids1 = StaticData.LineCatchAreaList.Where(t => t.AreaType == 5 && t.LineNo == "1").Select(t => t.Id).ToArray();
                            var emptyids2 = StaticData.LineCatchAreaList.Where(t => t.AreaType == 5 && t.LineNo == "2").Select(t => t.Id).ToArray();

                            var locatornum1 = StaticData.CarRealList.Count(t => emptyids1.Contains(t.LocatorId));
                            var locatornum2 = StaticData.CarRealList.Count(t => emptyids2.Contains(t.LocatorId));
                            LineCatchArea linearea = null;
                            //一库区车多,进二库区,,  两个空车区的分发空车逻辑
                            if (true)   ///if (locatornum1 > locatornum2)
                            {
                                linearea = StaticData.LineCatchAreaList.FirstOrDefault(t => t.AreaType == 5 && t.LineNo == "1" && t.AreaNo == "1");

                            }
                            else //二库区车多,进一库区
                            {
                                var locators = StaticData.LineCatchAreaList.Where(t => t.AreaType == 5 && t.LineNo == "1").OrderByDescending(t => t.AreaNo);
                                foreach (var locator in locators)
                                {
                                    var locatorempnum1 = StaticData.CarRealList.Count(t => t.LocatorId == locator.Id);
                                    if (locatorempnum1 < locator.MaxNumber)
                                    {
                                        linearea = locator;
                                        break;
                                    }
                                }
                            }
                            if (linearea != null)
                            {
                                car.OptDt = DateTime.Now;
                                car.LocatorId = linearea.Id;
                                car.LocatorArea = linearea;
                                DBService.ModifyRealCarinfoRecord(car);

                                this.plcHelper.Write(this.ScanPoint.PlcSetting4, linearea.AreaNo); 
                                ///回写plc状态处理完成,plc会清理数据
                                this.plcHelper.Write(this.ScanPoint.PlcSetting5, 1);
                                logger.Log("node:" + this.ScanPoint.NodeNo + "  plc:" + this.ScanPoint.PlcSetting4.PlcNo + " mu:" + linearea.AreaNo);
                                DBService.AddSystemLog(this.ScanPoint.NodeNo, car);
                            }
                            else
                            {
                                logger.Log("1006分流空车库 ,没有空车库满了");

                            }




                        }//小车移动中指定点位后,并且到位了
                        else if (Convert.ToInt32(carno) > 0 && Convert.ToInt32(carrun) == 1 && Convert.ToInt32(wcsend) == 1)
                        {
                            ///回写plc状态,,plc会清理数据
                            this.plcHelper.Write(this.ScanPoint.PlcSetting4, 0);
                            ///回写plc状态处理完成,plc会清理数据
                            this.plcHelper.Write(this.ScanPoint.PlcSetting5, 0);
                        }
                    }

                }
                catch (Exception ex)
                {
                    logger.Error("Logic1002UpLocator异常: " + this.ScanPoint.NodeNo + " :" + ex.Message + ex.StackTrace);
                }
                Thread.Sleep(300);
            }
        }
    }
}