cosmoim-852 fix 多语言翻译文件调整

src/i18n/lang/cn.ts

@@ -1,7 +1,6 @@
 export default {
   message: {
     hello: '你好',
-    //登录
     PleaseInputUserName: '请输入用户名',
     PleaseInputPassword: '请输入密码',
     Login: '登录',
@@ -27,13 +26,11 @@ export default {
     recommended: '推荐库位',
     error: '操作失败',
     operation: '操作',
-    //版本更新
     updatePrompt: '更新提示',
     Tip1: '请更新!',
+    Tip2: '更新成功，是否重启？',
     Tip3: '检测到有新版本为',
     restart: '重启',
-    Tip2: '更新成功，是否重启？',
-    //服务器设置
     ServerSetting: '服务器设置',
     PleaseInputIPAddress: '请输入IP地址',
     open: '开启',
@@ -41,7 +38,6 @@ export default {
     Save: '保存',
     TryAgain: '地址无效或服务不可用，请重试',
     SetServerSuccessfully: '设置服务器成功',
-    //工作区选择
     workArea_Title: '工作区列表',
     workArea_SubTitle: '您好，请从列表中选择您的工作区～',
     workArea_SelelctOne: '请选择一个工作区',
@@ -55,7 +51,6 @@ export default {
     workArea_Confirm: '确定',
     ReservoirArea: '库区',
     Confirm: '是否确认',
-    //原材料菜单
     rawMenu_ReceivingGoods: '收货',
     rawMenu_Handover: '交接',
     rawMenu_virtual_Handover: '虚拟单交接',
@@ -67,11 +62,8 @@ export default {
     Purchase: '采购单',
     BackSweep: '退扫',
     succeeded: '退扫成功',
-    //jpicker提示
     unselected: '未选中',
     scanning: '扫描',
-
-    //po收货
     po_ReceivingGoods: 'PO收货',
     po_ReturnGoods: 'DN退货',
     po_OddNumbers: 'PO单号',
@@ -110,8 +102,6 @@ export default {
     po_RemainingQuantity: '剩余数量',
     Cumulative: '累计',
     total: '累计',
-
-    //dn收货
     dn_ReceivingGoods: 'DN收货',
     dn_OddNumbers: 'DN单号',
     QuantityReturned: '已退数量',
@@ -131,15 +121,12 @@ export default {
     dn_Tip3: '实际收货数量小于需求数量',
     Line: '行项目',
     po_Deliver: '出库',
-    //交接菜单页
     Handover: '交接',
     Picking: '拣配',
     SummaryAndHandover: '汇总交接',
     FillingMaterials: '补料',
     ReturnedMaterials: '退料',
     Inventory_query: '库存查询',
-
-    //拣配
     Pi_PickingQuery: '拣配查询',
     Pi_OrderNo: '订单号',
     Pi_factory: '工厂',
@@ -202,7 +189,6 @@ export default {
     Pi_tip17: '请选择一条DN单',
     Pi_tip18: '请选中要移库的数据',
     Pi_tip19: '只能选择一条修改数量',
-    //汇总交接
     Summary_Query: '汇总查询',
     Summary_Contain: '包含',
     Summary_Exclude: '刨除',
@@ -214,7 +200,6 @@ export default {
     Summary_SummaryAndHandover: '汇总交接',
     Summary_HandoverByOrder: '按单交接',
     Summary_Number: '可退数量',
-
     Replenishment_Number: '可补数量',
     Summary_Receiver: '接收人',
     different: '请输入不同接收人',
@@ -226,8 +211,6 @@ export default {
     Summary_Tip: '解锁失败，详情：',
     Summary_FinishedProductMaterialNumber: '成品物料号',
     Summary_QuantityOfThisHandover: '本次交接数量',
-
-    //补料
     Feeding_VoucherNo: '凭证号',
     Feeding_VoucherDate: '凭证日期',
     Feeding_ReplenishmentDetails: '补料明细',
@@ -238,8 +221,6 @@ export default {
     Feeding_Tip3: '请输入口令/密码!',
     Feeding_Tip4: '请输入接收人!',
     Feeding_ReplenishedQuantity: '已补数量',
-
-    //退料
     return_OperatorName: '工位退料人',
     return_Type: '退料类型',
     return_Tip1: '退料人不能为空',
@@ -254,8 +235,6 @@ export default {
     target: '目标工位',
     collecting: '请输入领用单号',
     MaterialCount: '物料盘点',
-
-    //库内主菜单
     Warehouse: '成品库内',
     Relocation: '成品移库',
     Scrap: '成品报废',
@@ -273,8 +252,6 @@ export default {
     RowScrap: '原材料报废',
     RowRelocation: '原材料移库',
     RowCollectionAndBorrowing: '原材料领用借用',
-
-    // 原材料盘点
     InventoryOrderNo: '单号',
     InventoryMaterielNo: '物料号',
     InventoryMateriel: '物料名',
@@ -283,8 +260,6 @@ export default {
     InventoryNumber: '盘点单号',
     InventoryFinish: '完成',
     closure: '关闭',
-
-    // 委外-入库
     CommissionEntrant: '委外入库',
     CommissionedSingleNumber: '单号',
     CommissionedMaterielNo: '物料号',
@@ -297,8 +272,6 @@ export default {
     CommissionedEntrantDetails: '入库明细',
     CommissionedReceiptQuantity: '收货数量',
     subcontract: '委外',
-
-    // 委外-出库
     CommissionGoOut: '委外出库',
     Outbound: '出库库位',
     Warehousing: '入库库位',
@@ -308,7 +281,6 @@ export default {
     CommissionedDetails: '出库明细',
     closing: '确认关闭订单？',
     CommissionedGoOutNumber: '出库数量',
-    // 委外-提示
     Commission_tips1: '请输入单号',
     Commission_tips2: '请输入正确的库位和数量',
     Commission_tips3: '请输入大于0的数量',
@@ -326,7 +298,6 @@ export default {
     _tips6: '请先输入要查询的单号',
     Out: '出',
     enter: '入',
-    //移库
     Warehouse_QueryCriteria: '查询条件',
     Warehouse_TransferOrderNo: '移库单号',
     Warehouse_TransferDetails: '移库明细',
@@ -338,22 +309,16 @@ export default {
     transfer_barcode: '移库批次',
     Product_code: '产品编码',
     Access_type: '出入类型',
-
-    //报废
     Scrap_ScrapNo: '报废单',
     Scrap_Tip: '请输入报废单号',
     Scrap_ScrapDetails: '报废明细',
     operatingTime: '操作时间',
     finishedProductReport: '报废明细',
     product_Tip10: '数量已达上限，请勿扫描',
-
-    //领用借用
     borrow_OrderNo: '单号',
     borrow_Tip: '请输入单号',
     borrow_CollectionAndBorrowingDetails: '领用借用明细',
     usingDetail: '领用借用明细',
-
-    //成品主菜单
     EnterTheWarehouse: '入库',
     GetOutOfTheWarehouse: '成品出库',
     InTheWarehouse: '成品库内',
@@ -366,16 +331,12 @@ export default {
     DumpListSH: '转储单收货',
     DumpListSHMX: '转储单收货明细',
     deliver: 'DN发货',
-
-    //成品入库主菜单
     product_item1: '成品下线',
     product_item2: '周转车下线',
     product_item3: '半成品空调/洗衣机下线',
     product_item4: '半成品门体上线',
     product_item5: '半成品箱体上线',
     LocationInventory: '库位盘点',
-
-    //成品下线
     product_Location: '库位',
     LocationScanned: '库位已扫',
     product_barCode: '条码',
@@ -405,8 +366,6 @@ export default {
     product_Tip8: '扫码成功',
     product_Tip9: '该条码未入库',
     repeatedly: '请勿重复添加',
-
-    //半成品冰箱下线
     product_unit1: '件/个',
     product_unit2: '双',
     product_unit3: '码',
@@ -416,12 +375,7 @@ export default {
     product_unit7: '请输入物料条码',
     materialCode: '请输入物料号',
     code: '盘点单号',
-    //成品空调/洗衣机下线
-    //半成品门体上线
-    //半成品箱体上线
     product_BoxCode: '箱体条码',
-
-    //STO出库
     product_Platform: '月台',
     product_DocumentNumber: '单据号',
     product_STONumber: 'STO单',
@@ -437,8 +391,6 @@ export default {
     product_Tip6: '扫描出库数量不可大于物料总数',
     product_StoListDetails: 'STO单明细',
     delete: '删除',
-
-    //领用借用
     Warehouse_Tip1: '请输入DN单号',
     Warehouse_Tip2: '请选择库位地点',
     Warehouse_Tip3: '请选择目标库位地点',
@@ -466,15 +418,12 @@ export default {
     Warehouse_BCP: '半成品',
     DocumentScanned: '单据已扫',
     Inventory_count: '盘点数',
-
-    //提示
     AppendMateriel1: '请输入正确的库位和数量',
     AppendMateriel2: '请输入大于0的数量',
     AppendMateriel3: '不能大于需求数量，请重新输入',
     AppendMateriel4: '请选择正确的库位',
     AppendMateriel5: '请先选择一个物料',
     demandQuantity: '总数量大于需求数量',
-    //俄罗斯海外PO
     ImportPO: 'PO海外收货',
     container: '集装箱号',
     WPM: 'WPM共',

src/i18n/lang/en.ts

@@ -1,7 +1,6 @@
 export default {
   message: {
     hello: 'Hello',
-    //登录
     PleaseInputUserName: 'Please input user name',
     PleaseInputPassword: 'Please input password',
     Login: 'Login',
@@ -19,93 +18,68 @@ export default {
     request_Tip6: 'Server internal error',
     request_Tip7: 'Service not implemented',
     request_Tip8: 'Gateway error',
-    inventory: 'inventory',
     request_Tip9: 'Service Unavailable',
-    failed: 'Posting failed, please go to PC Posting',
     request_Tip10: 'Gateway timeout',
-    differences: 'differences',
-    shortage: 'shortage',
     request_Tip11: 'HTTP version is not supported',
-    Pi_tip12: 'The current handover quantity must be equal to the picked quantity',
+    sweep: 'Whether to back sweep',
-    Inventory_query: 'Inventory query',
-    target: 'The target location',
     success: 'Success',
-    selected: 'Insufficient stock of selected material',
+    recommended: 'Lock',
     error: 'Error',
-    NowTime: 'Time',
-    SelectTime: 'Please select the time',
-    successful: 'Query was successful',
     operation: 'Operation',
-    Pi_tip13: 'Please select the material to submit',
-    Pi_tip15: 'Please ensure that the handover quantity is equal to the demand quantity',
-    Pi_tip16: 'You can only select one DN list',
-    Pi_tip17: 'Please select a dn list',
-    Pi_tip18: 'Please select the data to be moved',
-    Pi_tip19: 'Only one item can be selected to modify the quantity',
-    Pi_tip20: 'The number of additions this time exceeds the maximum number of additions.',
-    //版本更新
     updatePrompt: 'Update tips',
     Tip1: 'please update!',
+    Tip2: 'Update succeeded. Are you sure to restart?',
     Tip3: 'The new version detected is',
     restart: 'Restart',
-    Tip2: 'Update succeeded. Are you sure to restart?',
-    //服务器设置
     ServerSetting: 'Server Setting',
-    sweep: 'Whether to back sweep',
     PleaseInputIPAddress: 'Please input IP address',
+    open: 'open',
     PleaseInputPortNumber: 'Please input port No',
     Save: 'Save',
     TryAgain: 'The address is invalid or the service is unavailable. Please try again',
     SetServerSuccessfully: 'Set server success',
-    //工作区选择
     workArea_Title: 'Work area list',
     workArea_SubTitle: 'Hello, Please select your work area from the list～',
     workArea_SelelctOne: 'Please select one work area from the list',
     workArea_Selelct: 'Selelct',
     workArea_Warehouse: 'WH',
     workArea_WarehouseName: 'WH name',
+    inventory: 'inventory',
     workArea_RegionName: 'Region name',
     workArea_WorkAreaName: 'Work area name',
     workArea_WarehouseClassify: 'WH classify',
-    Confirm: 'Confirm',
-    Inventory_count: 'Inventory count',
     workArea_Confirm: 'Confirm',
-    //jpicker提示
+    ReservoirArea: 'Reservoir area',
-    unselected: 'Unchecked',
+    Confirm: 'Confirm',
-    //原材料菜单
     rawMenu_ReceivingGoods: 'Receive',
     rawMenu_Handover: 'Handover',
     rawMenu_virtual_Handover: 'Virtual handover',
     rawMenu_virtual_Handover_QR: 'Confirm handover',
     LBWK: 'List is empty',
-    CommissionedDetails: 'detail',
-    closing: 'Confirm closing order?',
-    standard: 'FG barcode length must be 20',
     rawMenu_InTheLibrary: 'RAW WH',
     rawMenu_ReturnGoods: 'PO Return',
     rawMenu_SignOut: 'Sign out',
+    Purchase: 'Purchase',
+    BackSweep: 'Back sweep',
+    succeeded: 'Scan back succeeded',
+    unselected: 'Unchecked',
     scanning: 'Scan',
-    //po收货
     po_ReceivingGoods: 'PO receive',
     po_ReturnGoods: 'DN return',
-    returned: 'Return Qty',
-    returneds: 'Return Qty',
-    Closed: 'Closed',
-    quantity: 'Cumulative return quantity',
-    materials: 'Please return all materials',
     po_OddNumbers: 'PO No',
     po_Supplier: 'Supplier',
-    Total_scanned: 'Total',
     po_OrderType: 'Order type',
     po_Location: 'Inventory',
+    SAPLocation: 'There is no SAP location for the selected material, please select again',
     po_PleaseScan: 'Please scan PO',
     po_PleaseScanMATcode: 'Please scan MAT barcode',
     PleaseScan: 'Please scan',
-    barCodeLength: 'FG barcode length must be 20',
     po_PleaseInput: 'Plz input',
+    materials: 'Please return all materials',
     po_PleaseInputcar: 'Please input transfer vehicle',
     po_PleaseSlect: 'Please select Loc',
     po_Detailed: 'PO detail',
+    detailed: 'Detailed',
     po_Total: 'Total',
     po_Records: 'Records',
     po_SelectAll: 'Select all',
@@ -116,19 +90,28 @@ export default {
     po_MaterielNo: 'MAT code',
     Materiel: 'MAT',
     po_MaterielDes: 'MAT desc',
+    returned: 'Return Qty',
+    returneds: 'Return Qty',
+    quantity: 'Cumulative return quantity',
     po_DemandQuantity: 'Request Qty',
     DemandQuantity: 'Request',
     po_ActualQuantity: 'Receive Qty',
+    selected: 'Insufficient stock of selected material',
+    Picked: 'Picked Qty',
     po_ReturnGoodsQuantity: 'Return Qty',
     po_RemainingQuantity: 'Remaining Qty',
-
+    Cumulative: 'Cumulative',
-    //dn收货
+    total: 'Total',
     dn_ReceivingGoods: 'DN Receive',
     dn_OddNumbers: 'DN No',
+    QuantityReturned: 'Quantity returned',
+    SweptQuantity: 'Swept quantity',
     dn_PleaseScan: 'Please scan DN',
     barcode_PleaseScan: 'Please scan barcode',
+    create: 'create',
     dn_CarNumber: 'Vehicle No',
     dn_Time: 'Time',
+    Closed: 'Closed',
     dn_Detailed: 'DN detail',
     dn_Number: 'Qty',
     dn_Confirm: 'Confirm',
@@ -136,25 +119,35 @@ export default {
     dn_Tip: 'Receive Qty cannot be greater than the request Qty',
     dn_Tip2: 'Return Qty cannot be greater than the request Qty',
     dn_Tip3: 'Receive Qty is less than the request Qty',
-    Purchase: 'Purchase',
+    Line: 'RowItem',
-    //交接菜单页
+    po_Deliver: 'Deliver',
     Handover: 'Handover',
-    Pick: 'Pick up',
+    Picking: 'Picking',
     SummaryAndHandover: 'Summary handover',
     FillingMaterials: 'Append MAT',
     ReturnedMaterials: 'Return MAT',
-
+    Inventory_query: 'Inventory query',
-    //拣配
     Pi_PickingQuery: 'Pick up query',
     Pi_OrderNo: 'Order No',
     Pi_factory: 'Factory',
     Pi_materielNo: 'MAT code',
     Pi_order: 'Order Query',
     Query: 'Query',
+    time: 'Please select the time first',
+    scrapForm: 'Please scan the scrap form first',
+    materialName: 'material',
+    previousPage: 'prev',
+    nextPage: 'next',
+    HomePage: 'first',
+    TailPage: 'last',
+    finishedProduct: 'Please select finished product code first',
     Pi_InputMrp: 'Please input MRP',
     Pi_InputFactory: 'Please input factory code',
+    shortage: 'shortage',
+    Production: 'Order',
     Pi_OrderNoNotSelected: 'Order number not selected',
     Pi_NoDataFound: 'No Data Found',
+    differences: 'differences',
     Pi_NoData: 'No data to operate',
     Pi_QueryResults: 'Query result',
     Pi_Summary: 'By Summary',
@@ -164,30 +157,38 @@ export default {
     Pi_upload: 'Upload',
     Pi_tip1: 'Please input the pick Qty',
     Pi_tip2: 'The pick up Qty is an greater than 0',
-    detailed: 'Detailed',
     Pi_tip3: 'Please update the pick up Qty before uploading',
     Pi_tip10: 'Please update the append Qty before uploading',
     Pi_tip4: 'No data available to upload',
     Pi_tip: 'Tip',
     Pi_tip5: 'Success',
     Pi_tip6: 'The pick up Qty plus pick Qty cannot be greater than the Request Qty',
-    Pi_tip7: 'Please select the row to update',
+    Pi_tip14: 'The current handover quantity + cumulative picking quantity cannot be greater than the required quantity',
     Pi_tip8: 'This handover Qty plus handover Qty cannot be greater than the pick up Qty',
     Pi_tip9: 'The append Qty plus replenished Qty cannot be greater than the Request Qty',
+    Pi_tip12: 'The current handover quantity must be equal to the picked quantity',
     JJSLBNWK: 'Handover Qty cannot be empty',
+    Pi_tip7: 'Please select the row to update',
     Pi_tip11: 'Handover Qty is greater than the pick up Qty,then will be generated the virtual INV',
-    Pi_HandoverQuantity: 'Handed over Qty',
     Pi_unit: 'Unit',
     Pi_CumulativePickingQuantity: 'Cumulative Pick up Qty',
+    Pi_HandoverQuantity: 'Handed over Qty',
     Pi_Station: 'Station',
     Pi_FinishedProductModel: 'FG code',
     Pi_CurrentPickingQuantity: 'Current Pick up Qty',
     Pi_PickedQuantity: 'Picked Qty',
     Pi_QuantityHandedOver: 'Handedover Qty',
     Pi_distribution: 'Distribution',
-    Cumulative: 'Cumulative',
+    successful: 'Query was successful',
-
+    ModelCode: 'Model code',
-    //汇总交接
+    ModelName: 'Model name',
+    ModelScanned: 'Model scanned',
+    Pi_tip13: 'Please select the material to submit',
+    Pi_tip15: 'Please ensure that the handover quantity is equal to the demand quantity',
+    Pi_tip16: 'You can only select one DN list',
+    Pi_tip17: 'Please select a dn list',
+    Pi_tip18: 'Please select the data to be moved',
+    Pi_tip19: 'Only one item can be selected to modify the quantity',
     Summary_Query: 'Summary Query',
     Summary_Contain: 'Contain',
     Summary_Exclude: 'Exclude',
@@ -201,40 +202,39 @@ export default {
     Summary_Number: 'Qty',
     Replenishment_Number: 'Qty',
     Summary_Receiver: 'Receiver',
-    total: 'Total',
+    different: 'Please enter a different recipient',
     Summary_Password: 'Pwd',
+    screen: 'Query',
     Summary_PleaseInputNumber: 'Please input Qty',
     Summary_PleaseInputReceiver: 'Please input receiver',
     Summary_PleaseInputPassword: 'Please input password',
     Summary_Tip: 'Unlock fail, Detail:',
     Summary_FinishedProductMaterialNumber: 'FG code',
     Summary_QuantityOfThisHandover: 'Handover Qty',
-    Pi_tip14: 'The current handover quantity + cumulative picking quantity cannot be greater than the required quantity',
-
-    //补料
     Feeding_VoucherNo: 'Document No',
     Feeding_VoucherDate: 'Document Date',
     Feeding_ReplenishmentDetails: 'Append detail',
     Feeding_Tip1: 'Please input append Qty',
     Feeding_Tip2: 'The append Qty is an integer greater than 0！',
+    receive: 'receiveLoc',
+    quantityNum: 'Qty',
     Feeding_Tip3: 'Please input password!',
     Feeding_Tip4: 'Please input receiver!',
     Feeding_ReplenishedQuantity: 'Appended Qty',
-
-    //退料
     return_OperatorName: 'Return by',
     return_Type: 'Return type',
     return_Tip1: 'Return by cannot be empty',
-    SAPLocation: 'There is no SAP location for the selected material, please select again',
     return_Tip2: 'Factory code cannot be empty',
     return_Tip3: 'Qty cannot be empty',
     return_Tip4: 'Return Qty cannot be greater than total Qty',
-    the: 'The Qty',
     quantitys: 'Cannot be greater than the quantity to be returned',
     actual: 'The actual returned quantity is not equal to the quantity to be returned',
+    Requisition: 'Requisition',
+    greater: 'Cannot be greater than total',
     receiveAStation: 'Receiving',
-
+    target: 'The target location',
-    //库内主菜单
+    collecting: 'Please enter the collecting doc No',
+    MaterialCount: 'Stocktaking  by MAT',
     Warehouse: 'FG WH',
     Relocation: 'FG transfer',
     Scrap: 'FG scrap',
@@ -242,79 +242,45 @@ export default {
     Inventory: 'FG PSV',
     raw_Inventory: 'Raw Inventory',
     Transfer: 'Code',
+    LibraryCode: 'Please change the library code',
     generate: 'Generate',
-
+    TargetLocation: 'Please select a different target location',
+    NowTime: 'Time',
+    SelectTime: 'Please select the time',
     RowWarehouse: 'RAW WH',
     SemiProductZC: 'SFG transfer',
     RowScrap: 'RAW scrap',
     RowRelocation: 'RAW transfer',
     RowCollectionAndBorrowing: 'RAW cost center',
-
-    // 原材料盘点
     InventoryOrderNo: 'Order',
     InventoryMaterielNo: 'MAT code',
     InventoryMateriel: 'MAT name',
     InventoryTotalNumber: 'Total',
-    create: 'create',
-    open: 'open',
-    materialName: 'material',
-    Enable: 'The memory function is enabled',
-    Closerepository: 'The memory function is disabled',
-    quantityNum: 'Qty',
-    recommended: 'Lock',
-    previousPage: 'prev',
-    nextPage: 'next',
-    HomePage: 'first',
-    TailPage: 'last',
-    materialCode: 'Please enter the material number',
-    receive: 'receiveLoc',
-    Production: 'Order',
     InventoryPleaseScan: 'Please scan No.',
-    InventoryFinish: 'Finish',
-    collecting: 'Please enter the collecting doc No',
-    different: 'Please enter a different recipient',
-    MaterialCount: 'Stocktaking  by MAT',
     InventoryNumber: 'Inventory number',
-    DocumentScanned: 'Document scanned',
+    InventoryFinish: 'Finish',
-    ReservoirArea: 'Reservoir area',
-    ModelCode: 'Model code',
-    ModelName: 'Model name',
-    ModelScanned: 'Model scanned',
-    selectCode: 'Please select code first',
-    DocumentNumber: 'File number',
     closure: 'Close',
-
-    // 委外-入库
     CommissionEntrant: 'Subcontracting receipt',
     CommissionedSingleNumber: 'Order',
     CommissionedMaterielNo: 'MAT code',
     CommissionedMaterielDesc: 'MAT desc',
-    SourceLocation: 'Source location',
-    barcode: 'Please enter barcode',
-    Requisition: 'Requisition',
-    scrapForm: 'Please scan the scrap form first',
-    finishedProduct: 'Please select finished product code first',
     CommissionedDemandData: 'Demand',
     CommissionedCumulativeData: 'Total',
     CommissionedLocation: 'Loc',
     CommissionedThisNumber: 'Quantity',
     CommissionedNumber: 'Receipt quantity',
     CommissionedEntrantDetails: 'Warehousing',
-    greater: 'Cannot be greater than total',
-    LibraryCode: 'Please change the library code',
     CommissionedReceiptQuantity: 'Receipt quantity',
-    TargetLocation: 'Please select a different target location',
     subcontract: 'Subcontract',
-
-    // 委外-出库
     CommissionGoOut: 'Subcontracting issue',
     Outbound: 'Outbound location',
     Warehousing: 'Warehouse location',
-    CommissionedGoOutDetails: 'Delivery details',
     PleaseQuantity: 'Please enter this quantity',
-    Picked: 'Picked Qty',
+    the: 'The Qty',
+    CommissionedGoOutDetails: 'Delivery details',
+    CommissionedDetails: 'detail',
+    closing: 'Confirm closing order?',
     CommissionedGoOutNumber: 'Outbound quantity',
-    // 委外-提示
     Commission_tips1: 'Please enter the order No',
     Commission_tips2: 'Please enter the correct location and quantity',
     Commission_tips3: 'Please enter a quantity greater than 0',
@@ -332,45 +298,27 @@ export default {
     _tips6: 'Please enter the order number to query first',
     Out: 'Out',
     enter: 'Enter',
-    //移库
     Warehouse_QueryCriteria: 'Query criteria',
     Warehouse_TransferOrderNo: 'Transfer order No',
-    BackSweep: 'Back sweep',
-    SweptQuantity: 'Swept quantity',
-    LocationInventory: 'Stocktaking  by LOC',
     Warehouse_TransferDetails: 'Transfer detail',
     Warehouse_OrderNo: 'Order No',
     Warehouse_No: 'Order',
-    LocationScanned: 'Location scanned',
     Warehouse_OriginalLocation: 'Original Loc',
-    code: 'Inventory number',
     Warehouse_TargetLocation: 'Target Loc',
     Warehouse_Tip: 'Please input the transfer order No',
     transfer_barcode: 'Library transfer barcode',
     Product_code: 'Product code',
     Access_type: 'Access type',
-
-    //报废
     Scrap_ScrapNo: 'Scrap',
     Scrap_Tip: 'Please input scrap No',
     Scrap_ScrapDetails: 'Scrap detail',
     operatingTime: 'OperatingTime',
     finishedProductReport: 'Scrap details',
     product_Tip10: 'The number has reached the upper limit. Do not scan',
-
-    //领用借用
     borrow_OrderNo: 'Order No',
     borrow_Tip: 'Please input order No',
     borrow_CollectionAndBorrowingDetails: 'Cost center detail',
     usingDetail: 'Borrowing details',
-
-    //成品主菜单
-    // EnterTheWarehouse: 'Enter The Warehouse',
-    // GetOutOfTheWarehouse: 'Finish Product Get Out Of The Warehouse',
-    // InTheWarehouse: 'Finish Product In The Warehouse',
-    // SemiProductEnterTheWarehouse: 'Semi Product Enter The Warehouse',
-    // SemiProductGetOutOfTheWarehouse: 'Semi Product Get Out Of The Warehouse',
-    // FinishProductEnterTheWarehouse: 'Finish Product Enter The Warehouse',
     EnterTheWarehouse: 'Inbound',
     GetOutOfTheWarehouse: 'FG outward',
     InTheWarehouse: 'FG WH',
@@ -383,50 +331,41 @@ export default {
     DumpListSH: 'SFG receive',
     DumpListSHMX: 'SFG receive detail',
     deliver: 'DN deliver goods',
-    Line: 'RowItem',
-    screen: 'Query',
-    time: 'Please select the time first',
-    po_Deliver: 'Deliver',
-    //成品入库主菜单
     product_item1: 'FG inward',
     product_item2: 'Transfer vehicle offline',
     product_item3: 'SFG Air Conditioner / Washing Machine Offline',
     product_item4: 'SFG Door Body Online',
     product_item5: 'SFG Box Body Online',
-    fileNumber: 'Please enter the file number',
+    LocationInventory: 'Stocktaking  by LOC',
-    Posting: 'Posting',
-
-    //成品下线
     product_Location: 'Loc',
-    succeeded: 'Scan back succeeded',
+    LocationScanned: 'Location scanned',
     product_barCode: 'Barcode',
-    barCode: 'Bar code',
     sweepBarCode: 'Barcode',
-    QuantityReturned: 'Quantity returned',
+    barcode: 'Please enter barcode',
     product_TransferCar: 'Transfer vehicle',
     product_MaterialCode: 'MAT code',
     product_FGCode: 'FG code',
-    product_add: 'Add',
     product_FGDes: 'FG desc',
     product_MaterialDes: 'MAT desc',
     product_Number: 'Qty',
-    repeatedly: 'Do not add repeatedly',
-    delete: 'Delete',
     product_costCenter: 'Cost center',
     product_Unit: 'Unit',
     product_Cancel: 'Cancel',
     product_Delete: 'Delete',
     product_Empty: 'Empty',
     product_AllSelect: 'Select all',
+    product_add: 'Add',
     product_Confirm: 'Confirm',
     product_Upload: 'Submit',
     product_Tip1: 'The Loc cannot be empty',
     product_Tip2: 'Please select at least one data',
     product_Tip3: 'Please select Loc',
+    Enable: 'The memory function is enabled',
+    Closerepository: 'The memory function is disabled',
     product_Tip7: 'The same bar code cannot be entered repeatedly!',
     product_Tip8: 'Success!',
     product_Tip9: 'The barcode is not in the warehouse',
-    //半成品冰箱下线
+    repeatedly: 'Do not add repeatedly',
     product_unit1: 'PCS',
     product_unit2: 'Pair',
     product_unit3: 'Yard',
@@ -434,12 +373,9 @@ export default {
     product_unit5: 'CTN',
     product_unit6: 'Other',
     product_unit7: 'Please input material barcode',
-    //成品空调/洗衣机下线
+    materialCode: 'Please enter the material number',
-    //半成品门体上线
+    code: 'Inventory number',
-    //半成品箱体上线
     product_BoxCode: 'Box Code',
-
-    //STO出库
     product_Platform: 'Platform',
     product_DocumentNumber: 'Document No',
     product_STONumber: 'STO No',
@@ -447,15 +383,14 @@ export default {
     product_Swept: 'Scan',
     product_MaterilTotalNumber: 'Total',
     product_BarCode: 'Barcode',
+    SourceLocation: 'Source location',
     product_PickingDetails: 'Pick up detail',
-    Picking: 'Picking',
     product_Bookkeeping: 'Bookkeeping',
     product_Tip4: 'Order No cannot be blank',
     product_Tip5: 'The bar code is not standard',
     product_Tip6: 'The scanned out Qty cannot be greater than the total number of msaterials',
     product_StoListDetails: 'STO detail',
-
+    delete: 'Delete',
-    //领用借用
     Warehouse_Tip1: 'Please input DN No',
     Warehouse_Tip2: 'Please select Loc',
     Warehouse_Tip3: 'Please select the target Loc',
@@ -463,8 +398,16 @@ export default {
     Warehouse_Tip5: 'Please scan the No',
     Warehouse_Tip6: 'Please select MAT',
     Warehouse_Tip7: 'PSV not completed, are you sure to continue',
+    selectCode: 'Please select code first',
+    standard: 'FG barcode length must be 20',
+    Total_scanned: 'Total',
     Warehouse_Tip8: 'Please input cost center',
+    barCodeLength: 'FG barcode length must be 20',
     Warehouse_Tip9: 'Success',
+    DocumentNumber: 'File number',
+    Posting: 'Posting',
+    fileNumber: 'Please enter the file number',
+    failed: 'Posting failed, please go to PC Posting',
     Warehouse_Tip10: 'Please select SAP INV Loc',
     Warehouse_Tip11: 'The order No does not exist or the operation has been completed',
     Warehouse_TotalNumber: 'Total',
@@ -473,16 +416,14 @@ export default {
     Warehouse_WX: 'External Sale',
     Warehouse_YJ: 'Prototype',
     Warehouse_BCP: 'SFG',
-
+    DocumentScanned: 'Document scanned',
-    //提示
+    Inventory_count: 'Inventory count',
     AppendMateriel1: 'Please enter the correct location and quantity',
     AppendMateriel2: 'Please enter a quantity greater than 0',
     AppendMateriel3: 'Cannot be greater than the required quantity, please re-enter',
     AppendMateriel4: 'Please select the correct location',
     AppendMateriel5: 'Please select a material first',
-    AppendMateriel6: 'Please select a piece of data first',
     demandQuantity: 'The total quantity is greater than the demand quantity',
-    //俄罗斯海外PO
     ImportPO: 'Import PO Receive',
     container: 'code',
     WPM: 'WPM',
@@ -520,7 +461,6 @@ export default {
     barcodeSource: 'Scan the barcode of the source container',
     ContainerBarcode: 'Container barcode',
     scan: 'scan',
-    //ss
     LocalReceiving: 'DN Receive',
     OverseasShipping: 'Import DN',
     OverseasPO: 'Import PO Receive',

src/i18n/lang/ru.ts

@@ -23,15 +23,17 @@ export default {
     request_Tip11: 'HTTP-версия не поддерживается',
     sweep: 'Подметать ли назад',
     success: 'Успех',
+    recommended: 'рекомендова',
     error: 'Ошибка',
     operation: 'Операция',
     updatePrompt: 'Советы по обновлению',
     Tip1: 'пожалуйста обновите!',
+    Tip2: 'Обновление выполнено. Вы уверены, что перезапустите?',
     Tip3: 'Обнаруженная новая версия',
     restart: 'Начать сначала',
-    Tip2: 'Обновление выполнено. Вы уверены, что перезапустите?',
     ServerSetting: 'Настройка сервера',
     PleaseInputIPAddress: 'Пожалуйста, введите IP-адрес',
+    open: 'нача',
     PleaseInputPortNumber: 'Пожалуйста, введите номер порта',
     Save: 'Сохранять',
     TryAgain: 'Адрес недействителен или услуга недоступна. Пожалуйста, попробуйте еще раз',
@@ -106,6 +108,7 @@ export default {
     SweptQuantity: 'Пройденное количество',
     dn_PleaseScan: 'Пожалуйста, отсканируйте DN',
     barcode_PleaseScan: 'Пожалуйста, отсканируйте штрих-код',
+    create: 'Создание дополнительного материалов',
     dn_CarNumber: '№ транспортного средства',
     dn_Time: 'Время',
     Closed: 'Закрыто',
@@ -132,10 +135,16 @@ export default {
     Query: 'Запрос',
     time: 'Сначала выберите время',
     scrapForm: 'Пожалуйста, сначала отсканируйте форму записки',
+    materialName: 'Название вещества',
+    previousPage: 'На последней странице.',
+    nextPage: 'На следующей странице.',
+    HomePage: 'Главн страниц',
+    TailPage: 'Нашел ег',
     finishedProduct: 'Сначала выберите готовый код продукта',
     Pi_InputMrp: 'Пожалуйста, введите MRP',
     Pi_InputFactory: 'Пожалуйста, введите заводской код',
     shortage: 'нехватка',
+    Production: 'Заказ на производство',
     Pi_OrderNoNotSelected: 'Номер заказа не выбран',
     Pi_NoDataFound: 'Данные не найдены',
     differences: 'различия',
@@ -193,6 +202,7 @@ export default {
     Summary_Number: 'Кол-во',
     Replenishment_Number: 'Кол-во',
     Summary_Receiver: 'Получатель',
+    different: 'Пожалуйста, введите другого получателя',
     Summary_Password: 'Pwd',
     screen: 'Запрос',
     Summary_PleaseInputNumber: 'Пожалуйста, введите Кол-во',
@@ -206,6 +216,8 @@ export default {
     Feeding_ReplenishmentDetails: 'Добавить детали',
     Feeding_Tip1: 'Пожалуйста, введите количество',
     Feeding_Tip2: 'Добавляемое количество — целое число больше 0！',
+    receive: 'Принимающий резерв',
+    quantityNum: 'Количество добавок',
     Feeding_Tip3: 'Пожалуйста, введите пароль!',
     Feeding_Tip4: 'Пожалуйста, введите приемник!',
     Feeding_ReplenishedQuantity: 'Добавленное количество',
@@ -264,6 +276,7 @@ export default {
     Outbound: 'Исходящее местоположение',
     Warehousing: 'Расположение склада',
     PleaseQuantity: 'Пожалуйста, введите это количество',
+    the: 'Это число.',
     CommissionedGoOutDetails: 'Подробности доставки',
     CommissionedDetails: 'деталь',
     closing: 'Подтвердить заказ на закрытие?',
@@ -289,6 +302,7 @@ export default {
     Warehouse_TransferOrderNo: 'Заказ на перевод №',
     Warehouse_TransferDetails: 'Детали передачи',
     Warehouse_OrderNo: '№ заказа',
+    Warehouse_No: 'номер',
     Warehouse_OriginalLocation: 'Исходное местоположение',
     Warehouse_TargetLocation: 'Местоположение цели',
     Warehouse_Tip: 'Пожалуйста, введите заказ на перевод Нет',
@@ -307,11 +321,11 @@ export default {
     usingDetail: 'Детали заимствования',
     EnterTheWarehouse: 'Входящий',
     GetOutOfTheWarehouse: 'Выход из склада FG',
-    InTheWarehouse: 'FG WH',
+    InTheWarehouse: 'Внутри склада',
     SemiProductEnterTheWarehouse: 'SFG входящий',
     SemiProductGetOutOfTheWarehouse: 'Полуфабрикаты со склада',
     FinishProductEnterTheWarehouse: 'Вход на склад FG',
-    DumpList: 'SFG',
+    DumpList: 'Складской лист.',
     DumpListFH: 'Доставка СФГ',
     DumpListFHMX: 'Сведения о доставке SFG',
     DumpListSH: 'SFG получить',
@@ -346,6 +360,8 @@ export default {
     product_Tip1: 'Лок не может быть пустым',
     product_Tip2: 'Пожалуйста, выберите хотя бы одни данные',
     product_Tip3: 'Пожалуйста, выберите Лок.',
+    Enable: 'Память хранилища включена',
+    Closerepository: 'Память хранилища отключена',
     product_Tip7: 'Один и тот же штрих-код нельзя вводить повторно!',
     product_Tip8: 'Успех!',
     product_Tip9: 'Штрих-кода нет на складе',
@@ -357,6 +373,7 @@ export default {
     product_unit5: 'CTN',
     product_unit6: 'Другой',
     product_unit7: 'Пожалуйста, введите штрих-код материала',
+    materialCode: 'Введите номер объекта',
     code: 'Инвентарный номер',
     product_BoxCode: 'Код коробки',
     product_Platform: 'Платформа',
@@ -407,18 +424,46 @@ export default {
     AppendMateriel4: 'Пожалуйста, выберите правильное местоположение',
     AppendMateriel5: 'Сначала выберите материал',
     demandQuantity: 'Общее количество больше количества спроса',
+    ImportPO: 'По забирает товар из-за границы',
+    container: 'Номер контейнера',
+    WPM: 'WPM на',
+    WPMtotal: 'Сосуд.',
+    POPlan: 'План по.',
+    WPMInformation: 'Сообщение от WPM',
+    Container: 'ярд',
+    ContainerCode: 'ярд',
+    returner: 'Кто-то должен быть логином',
+    Inbound: 'Вход запасных частей на склад',
+    InboundDetail: 'В хранилище',
+    orderNum: 'Количество заказов',
+    totalNum: 'Совокупный число',
+    Operation: 'Оператор.',
+    StorageTime: 'Время входа в хранилище',
+    spareGoods: 'Доставка запчастей',
+    matcode: 'Кодирование вещества',
+    Quantity: 'Количество спроса',
+    scanningContainer: 'Сначала просканируйте код контейнера',
+    Pi_tipqty: 'Пожалуйста, убедитесь, что равняется количеству спроса',
+    SemiFinished: 'Полуфабрикат.',
+    SemiFinished_SO: 'SO полуфабриката',
+    SemiFinishedOffline: 'Полуфабрикаты от линии',
+    sweepCode: 'Пожалуйста, сначала пробей код',
+    outbound: 'Переключи в банк',
+    Batch: 'Серийный код.',
+    coding: 'Полуфабричный код',
+    SemiFinishedName: 'Название полуфабричного продукта',
+    batch: 'Введите код партии',
+    batchCode: 'Сначала просканируйте серийный код',
+    consolidation: 'Консолидация ёмкости',
+    Target: 'Контейнер для цели',
+    TargetContainer: 'Пожалуйста, просканируйте штрих-код контейнера цели',
+    source: 'Исходный сосуд.',
+    barcodeSource: 'Пожалуйста, просканируйте штрих-код источника',
+    ContainerBarcode: 'Штрих-код контейнера',
+    scan: 'сканирован',
     LocalReceiving: 'Получение товара DN на месте',
     OverseasShipping: 'Получение товара DN за границей',
     OverseasPO: 'Получение товара PO за границей',
     management: 'Управление запасными частями',
-    spareGoods: 'Доставка запчастей',
-    consolidation: 'Консолидация ёмкости',
-    Inbound: 'Вход запасных частей на склад',
-    SemiFinished_SO: 'SO полуфабриката',
-    SemiFinishedOffline: 'Полуфабрикаты от линии',
-    create: 'Создание дополнительного материалов',
-    ContainerCode: 'ярд',
-    Container: 'ярд',
-    scan: 'сканирован',
   },
 };